Materials | Mood
Chairs Finishing - Wicker 2mm
- A synthetic fibre (HDPE), high quality thermoplastic fibre
- Resistant to great variations in temperature, even extreme, from -25°C (-13°F) to + 70°C (158°F)
- Fibre dyed in the mass, UV-resistant, does not discolour in the light and sun
- Swimming pool and sea water resistant and repellent
- UV tested 3500 h of exposure DIN 53387 Xenon Arc radiation
- High stability with traction resistance >20 MPA (ISO527)
- Easy to clean and maintain, for specific maintenance, woven & textile cleaner (see p. 298)
- For outdoor and indoor use
- Each item of furniture is assembled by hand
- Toxin-free, ecological, 100% recyclable
Frame - Stainless steel
- Electropolished stainless steel 316L and 304L. The treatment concentrates chrome, nickel and other materials of the steel into the surface improving the corrosion resistance and leaving it with a lasting bright finish.
- Technique used in the naval industry
- Recommended near the sea, a swimming pool,in very industrial areas, or near a railway
- For outdoor and indoor use
Table Top:
Iroko:
- Superior quality West African hardwood – durability classification 1
- Great stability under the effect of UV radiation, chlorine and seawater
- Easy to clean, standard pre-treated with wood protector water repellent
- For outdoor and indoor use
- 100% recyclable
Ceramic:
The Manutti ceramic table tops are composed of sand, clay and natural stone formed into a layer which is heated at 1100°C. The 3 mm plates are cooled down and are glued together with a resin of polyurethane and fibre glass.
A few characteristics of ceramics are:
- Hygienic surface
- Colourproof
- Resistance to fire and high temperatures
- Impermeability
- Resistance to bending, scratching
- Resistance to wear and tear
- Resistance to chemical products
- Environment friendly
- For outdoor and indoor use
Acid Etched Glass:
- Hardened glass, acid etched on the top, coloured on the bottom side. Specific gravity: 2.5 kg
- Colour fastness: differences in colour between different table tops can occur. These are caused by the different production batches in which they were made. A colour difference of delta E = 2, measured on the surface of the glass, is acceptable
- Tensile strength: intrinsic tensile strength 10,000 N/mm2
- Scratch resistance: no value available, but clearly sharp objects may cause scratches on the surface of the glass
- Thermal conductivity: 0.8 W/mK
- For outdoor and indoor use
Trespa:
Trespa® is a flat thermo hardening resin-based plate made by compressing wood fibers at high pressure and high temperature (HPL - High Pressure Laminate). A special surface made with the patented EBC technology ensures durability and scratch resistance. Manutti works with 10mm and 13 mm thick plates and comes in all decors with a black finished border.